+357 24 030 677
• • •
ETICS MULTIPOR | Internal Wall Insulation

MULTIPOR Interior Thermal Insulation

External thermal insulation of a building is the most correct way of thermal insulation. But sometimes internal insulation is the only way to improve the energy efficiency of our home. This usually concerns apartments and buildings with historical facades.
MULTIPOR is a healthy, warm and safe solution.

Get a Quote
For other projects, there are options.
For your own home, there’s only one standard — MULTIPOR
Internal wall insulation 1 Internal wall insulation 2 Internal wall insulation 3 Internal wall insulation 4

The main reasons to choose MULTIPOR

Advantages of MULTIPOR for internal insulation of your home.

🌡️

Consistently high thermal efficiency
💧

Humidity regulation & mold protection
🔥

Highest fire safety rating (A1)
🌱

Absolute eco-friendliness
🔇

Built-in sound insulation
💶

Reduces engineering investments

Consistently high thermal efficiency

Unlike other common thermal insulation materials, MULTIPOR is the completely mineral-based material made of sand, cement and lime. These raw materials are not affected to ultraviolet, high temperatures or rainwater.

Therefore, the life time of MULTIPOR mineral boards in Cyprus is times longer compared to other insulating materials. In addition, MULTIPOR has stable, irreducible thermal efficiency, geometry and compressive strength throughout the life of your building.

Consistently low thermal conductivity of MULTIPOR, for decades, grants homeowners with consistently low cooling / heating bills over the life of the building.
Thermal efficiency masonry

Humidity regulation and mold protection

High humidity is a major problem for building materials and engineering systems used in the Cyprus climate. If the absolute humidity outside in the continental EU countries is usually 8−12 g/m³, then in Cyprus it can reach 25 g/m³ or even more!

Unlike polystyrene, MULTIPOR is able to absorb and move out excessive moisture from the walls and roofing elements of the building structure. The vapor transmission of MULTIPOR is approximately 50 times higher than XPS and 10-12 times higher compared to EPS.

MULTIPOR’s ability to dry a building — its walls and interior spaces — without annual maintenance or electricity consumption, for decades, is crucial to the humid climate of Cyprus!
High water vapor permeability

The highest fire safety rating

Made of mineral raw materials, MULTIPOR does not contain any flammable or combustible materials at all. When put into fire, MULTIPOR can withstand fire for up to 12 hours or more.

In the event of a fire, no flammable droplets are formed, and MULTIPOR does not produce fatal fire smoke, which is the leading cause of deaths. It can also be easily repaired without complete replacement after a fire.

The best fire safety properties make MULTIPOR the most desired thermal insulation material when safety is a priority!

Absolute eco-friendliness

The MULTIPOR internal insulation system is sustainable and has received numerous awards for being environmentally friendly. The natureplus ecolabel is a testament to the proven environmental and user friendliness of the boards, which consist purely of lime, sand, cement, and water.

These certificates also confirm the absence of any hazardous substances in the composition of MULTIPOR insulating boards, which makes them not only an excellent choice for external thermal insulation of buildings, but also an ideal choice in cases where floor, wall or ceiling insulation can only be done from the inside.

Sustainability of MULTIPOR makes our lives healthier and longer, reduces our medical costs and makes us happier!
Eco-friendliness NaturePlus

Built-in sound insulation

While not a cure specifically designed for sound insulation, MULTIPOR significantly helps improve it. Road noise is in the low frequency range and is perceived as extremely unpleasant and annoying.

MULTIPOR solves this problem thanks to its cellular structure. Depending on the external wall, its sound insulation index is increased by another 1-2 dB.

MULTIPOR is an effective sound insulation against traffic noise and similar noises, improving the quality of housing.
Sound insulation

Reducing investment & operating costs

A properly insulated home requires less energy to cool or heat. Given the warm climate of Cyprus, it is possible to abandon expensive floor heating systems and replace powerful AC systems with cheaper ones.

Complex electromechanical machines require annual service and replacement every 10-15 years, whereas MULTIPOR is paid for and installed only once without any future costs for energy sources.

MULTIPOR helps to reduce costs both for investment in complex heating/cooling systems and for future maintenance.
Engineering costs
Multipor Eco Quality Certificates: NaturePlus, IBU, eco-INSTITUT

Conclusion

Take care of yourself — choose the right "clothes" for your home!
MULTIPOR is not just a thermal insulation. In the climate of Cyprus, it solves many problems aimed at reducing costs and increasing safety.

Only MULTIPOR allows you at the same time:

  • to dramatically and constantly reduce heating and cooling costs for the entire life of a building;
  • to significantly reduce investment costs for climatic engineering systems, as well as future costs for their power supply and maintenance;
  • to make the microclimate in the house healthier and eliminate mold appearance;
  • significantly reduce or even completely eliminate the periodic repair work caused by wetting the walls under the polystyrene insulation, as well as the associated costs;
  • to protect the house from external fires and minimize damage in case of fire inside the house.

Get a quote

You can ask for MULTIPOR materials list needed for your project, order full service or ask for materials only!

Get a Consultation